Re: Unable to configure Hamachi Gateway on a Linux Gateway host

Hi guys, Same problem on a Debian 10 (Buster) machine fresh installed with hamachi version 2.1.0.203

I have no Issues on machines installed few weeks ago, with Debian 9 and hamachi ver. 2.1.0.198

Seems like hamachi doesn't create ham1 adapter:

I attach "ip address" command output:

Debian 8 with hamachi ver. 2.1.0.198 as Gateway

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ham-br0 state UP group default qlen 1000
    link/ether xxxxxxxxxxxxxxxxx brd ff:ff:ff:ff:ff:ff
    inet6 xxxxxxxxxxxxxxxxxxxxxxxx/64 scope link 
       valid_lft forever preferred_lft forever
3: ham0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1404 qdisc pfifo_fast state UNKNOWN group default qlen 500
    link/ether xxxxxxxxxxxxxxxxx brd ff:ff:ff:ff:ff:ff
    inet 25.44.xxx.xx/8 brd 25.255.255.255 scope global ham0
       valid_lft forever preferred_lft forever
    inet6 xxxxxxxxxxxxxxxxxx/96 scope global 
       valid_lft forever preferred_lft forever
    inet6 xxxxxxxxxxxxxxxxxxxxxxxxxxx4 scope link 
       valid_lft forever preferred_lft forever
4: ham-br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1404 qdisc noqueue state UP group default 
    link/ether xxxxxxxxxxxxxxxxx brd ff:ff:ff:ff:ff:ff
    inet 172.20.3.2/24 brd 172.20.3.255 scope global ham-br0
       valid_lft forever preferred_lft forever
    inet6 xxxxxxxxxxxxxxxxxxxxxxxx/64 scope link 
       valid_lft forever preferred_lft forever
5: ham1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1404 qdisc pfifo_fast master ham-br0 state UNKNOWN group default qlen 500
    link/ether xxxxxxxxxxxxxxxxx brd ff:ff:ff:ff:ff:ff
    inet6 xxxxxxxxxxxxxxxxxxxxxxxx/64 scope link 
       valid_lft forever preferred_lft forever

Debian 10, fresh installation on VM - hamachi 2.1.0.203 as Gateway

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ham-br0 state UP group default qlen 1000
    link/ether xxxxxxxxxxxxxxxxx brd ff:ff:ff:ff:ff:ff
    inet6 xxxxxxxxxxxxxxxxxxxxxxx6/64 scope link noprefixroute 
       valid_lft forever preferred_lft forever
3: ham0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1404 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether xxxxxxxxxxxxxxxx8 brd ff:ff:ff:ff:ff:ff
    inet 25.89.xxxxxx/8 brd 25.255.255.255 scope global ham0
       valid_lft forever preferred_lft forever
    inet6 xxxxxxxxxxxxxxxxxx/96 scope global 
       valid_lft forever preferred_lft forever
    inet6 xxxxxxxxxxxxxxxxxxxxxxxxx/64 scope link 
       valid_lft forever preferred_lft forever
4: ham-br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether xxxxxxxxxxxxxxxxx brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15/24 brd 10.0.2.255 scope global ham-br0
       valid_lft forever preferred_lft forever
    inet6 xxxxxxxxxxxxxxxxxxxxxxxx/64 scope link tentative 
       valid_lft forever preferred_lft forever